|
|
Water / Moisture
|
%(w/w)
|
max. 0.2
|
(Thermogravimetry, IR lamp 130°C)
|
|
Density
|
g/cm³
|
1.35
|
at 20 °C
|
|
Bulk Density
|
kg/m³
|
400 - 600
|
|
|
Decomposition Temperature
|
°C
|
> 350
|
(TGA 2% weight loss)
|
|
Average Particle Size (D50)
|
µm
|
20 - 40
|
|
|
|
The technical data are merely meant to describe the product and are not subject to regular monitoring. For further information, please consult our standard delivery specification. ¹) The product is constantly monitored to ensure that it adheres to the specified values. ²) The technical data are used solely to describe the product and are not subject to constant monitoring
|
|
Exolit OP 1230 is suited as flame retardant for thermoplastics and thermosets. Due to its high phosphorus content the product is distinguished by a high efficiency. Exolit OP 1230 can even be applied in high temperature polyamides because of its high temperature stability. It is suitable for both glass fibre reinforced
|
|
and unreinforced grades. The flame retardant polyamide compounds exhibit very good physical and electrical properties.
|
|
In high temperature polyamides of PA 6T/66 type, a dosage of approx. 15 % (by wt.) Exolit OP 1230 is usually sufficient to obtain the UL 94 V-0 classification for electrical compounds (at 1.6 as well as 0.8 mm thicknesses). Subjekt to the polymer grade, processing conditions and glass fibre reinforcement the dosage of the flame retardant may vary. Processing Before incorporating Exolit OP 1230, it is important to predry the polymer as usual. If possible, the resulting moisture content should be below 0.1 % (by
|
|
wt.) for high temperature polyamides, 0.05 % (by wt.) for PBT and 0.005% for PET. Predrying of Exolit OP 1230 is not necessary. However, predrying (e.
|
|
g. 4h at 120 °C) is recommended, if even very low moisture contents must be avoided.
|
|
|
|
|
| Payment Terms︰ | TT/DP |
| Product Data︰ | Product Description
Exolit OP 1230 ist a white, fine-grained powder based on an organic phosphinate. The product is non-hygroscopic and it is insoluble in water and organic solvents.
The technical data are merely meant to describe the product and are not subject to regular monitoring. For further information, please consult our standard delivery specification.
¹) The product is constantly monitored to ensure that it adheres to the specified values.
²) The technical data are used solely to describe the product and are not subject to constant monitoring |
|
|
|
